Securely fix the ArcBox to popular flat roof and rail mounting systems with our range of brackets.
The ArcBox M01 Rail Mounting Bracket fixes to a solar panel rail with either 8mm or 10mm T-Bolt. The bracket can be rotated before fixing to align the ArcBox with the cabling route. Due to the finished height of the ArcBox above the rail, this bracket is more suitable for flat roofing systems and ARC-M02 is more suitable for pitched roof systems.
Works with Schletter FixGrid, Sunfixings, K2 Dome fix, Van der Valk ValkPro and many more.
The ArcBox M02 Drop-Mounting Bracket fixes to a solar panel rail with either 8mm or 10mm T-Bolt and is suitable for rail widths up to 40mm. The ArcBox is attached to one of three mounting points offering different orientations, and finishes at a height of 15.5mm above the rail top face. This is ideal when fitting under a parallel mounted low-profile solar module, for example in pitched roof applications.
Works with Sunfixings, K2 Dome fix, Van der Valk ValkPro and many more.
The ArcBox M03 ArcBox Mounting Bracket is for use with the Esdec FlatFix System. The bracket slides onto an Esdec cable clip accessory to provide three orientation options for attaching the ArcBox.
The ArcBox M04 ArcBox Drop Mounting Bracket works with the Renusol FS10 system. The bracket pushes onto the side wall of the rail to provide two orientation options for attaching the ArcBox.
Securely fix the ArcBox below roof integrated solar systems with these brackets that simply clip over a roofing batten.
The ArcBox BM range of mounting brackets are for fixing the ArcBox behind an in-roof solar system. The brackets clip onto the tile battens and hold the ArcBox at a height to fit behind the roof integrated solar panel or tile. Available in a range of sizes to suit different timber thicknesses.
ARC-BM25 for batten thickness 22-25mm
ARC-BM30 for batten thickness 30mm
ARC-BM38 for batten thickness 38mm